After a flood, your home is likely to be filled with enormous amounts of water. All you can do after this has happened is take action that will help to increase safety and cleanup your home. The worst kind of water is going to be called “Black Water” and comes from sewage backups or overflows. This water is severely contaminated with every kind of fungi, bacteria, so it’s very dangerous.
It can originate from a broken sewer pipe or stopped up drain in your home, or from plugged sewer mains and broken pipes in the street as well.
This type of water damage requires a professional but if you want to tackle this as a home owner here are some important things you need to know.
The first thing that you can do is purchase a water pump. You will need to setup the pump so that it can pump the flood water out of your home. In most cases, this type of pump will be relatively easy to setup and understand.
You want to make sure that you set up the pump in the area of your home that has the most water in it, which is typically going to be a basement or the bottom floor. Water extraction is pretty easy when the pump is doing all of the work for you. It will take some time to get all of the water out, but you will be very happy when it is done. After you have extracted all of the water out of your home with the pump, it is time to begin the water clean up.
You need to soak up all of the excess water that is left in your home. Depending on how much water is left, you can do this with a pile of towels. You will need to soak up the water and release the water from the cloth outside. Once you have removed all of the excess water from your home with towels, you can start to vent the home. Venting the home will require you to open all of the windows and doors in the home.
The reason why this is such an important step is that it will get rid of all of the moisture in the home. If your home has been flooded, there is going to be massive amounts of excess moisture in the air, which can cause mold to grow. If you have fans that were not affected by the flooding, you can place them in the windows or doorways to speed up the removal of moisture from the air in the home.
If you are not using fans, you should give the home about six to eight hours of dry time. If you are using many fans to speed up this process, you can probably get away with four hours of dry time. The longer that you can run this process the less likely the chance of your home developing mold.
Removing the moisture from the air is the final water Extraction step. For the last step of water cleanup, you need to remove all of the items that were affected by the flooding. You need to assess the total damage and remove any belongings that have been tainted by the water. These are the four most important things that you can do for water cleanup and water extraction after your home has been the victim of flooding.